Product Index :: Automation Systems :: Industrial Network :: DeviceNet :: Slaves (I/O Terminals)

SmartSlice GRT1-Series I/O Terminals

GRT1-DRT/ GRT1-ID4(-1)/ GRT1-OD4(-1)/ GRT1-ROS2/

GRT1-AD2/ GRT1-DA2C/ GRT1-DA2V

Downsize Control Panels, Lower Costs, and Reduce Wiring Work Compared to Conventional I/O Terminals

• Building-block design allows connection of up to 64 Remote I/O Terminals (1,024 I/O points max.).

• Easy wiring. Simply insert pin terminals (no screwdriver required).

• Replace faulty Units online and restore parameters without disconnecting I/O wiring.

• Equipped with the popular Smart functions of the DRT2 Series.

• Easy, waste-free I/O configuration when making system changes or additions.

Features

Omron's SmartSlice is a modular remote I/O system full of patented, smart features - making it the most intelligent and easy-to-use remote I/O system currently available. SmartSlice will allow you to minimise engineering, troubleshooting and maintenance in your machine, line or plant, resulting in significantly reduced downtime.

Cost-Efficient Operation

Fast installation, easy configuration, reduced wiring, efficient use of cabinet space and built-in diagnostics all combine to make SmartSlice a key element of Omron's cost-efficient control solution. Furthermore, its high degree of modularity means it can be tailored to meet your specific requirements; you install just the right amount of I/O needed for each application.

Smart and Compact Design

Highly Compact

More compact than any other modular I/O system - with a height of only 80 mm - SmartSlice takes up very little space in your control cabinet. With a 3-wire input connection there is no need for additional power distribution rails; all your field wiring, including sensor power supply, can be directly connected to the units.

Reliable 3-piece Construction

All SmartSlice modules have a 3-piece construction. Interlocking bus blocks build the backplane of the system. The electronics module and removable terminal block plug into the backplane, enabling you to:

• Replace electronic modules while the bus structure and field wiring stay intact. During hot-swapping, all other I/O units continue to operate.

• Detach I/O terminals for per-wiring, maintenance or testing.

All contact surfaces between the electronics module and connectors are gold-plated for 100% reliable connections.

Easy Push-in Wiring for Quick Installation

The SmartSlice terminal blocks provide fast and reliable screwless clamp connections. The 'push-in' design allows tool-less insertion of terminated wires. Each individual connection is equipped with a test point to help verification of connections during commissioning and troubleshooting. Each terminal block has a pull-out label holder showing the terminal assignment of the unit.

The Smart Way to Configure

Fast Backup and Restore

With all the intelligence and advanced functions in SmartSlice units, backup and recovery of settings are important to support fast maintenance and repair of your machine. These functions are therefore also tool-less in SmartSlice. Al I/O unit data can be backed up in the bus interface unit at the flick of a switch. Recovery is even simpler; after hot-swapping a unit, all settings are automatically loaded.

Easy to Setup and Maintain

When used with Omron DeviceNet Master Units, no configuration is required at all. Simply set a bus address and connect. After startup, the I/O configuration can be stored with a single switch to make sure any incorrect change of units is detected.

top

See Related Products:

Loop Control CPU Unit     CJ1G-CPU[][]P/ CJ1W-P[][][] Fully integrated sequence and loop control built-in loop controller.