Product Index :: Auto Identification Systems :: RFID Systems

Standards Certification

V600 Electromagnetic RFID System

EN/IEC Standards

Note: The power supply cable for the above products with DC power supplies must be less than 10 m.
For information on the R&TTE Directive for Read/Write Heads and Read/Write Antennas, refer to the Regulations Based on the Radio Wave Laws.

UL Certifications

The above models have a DC power supply. Be sure the following conditions are met.
Connect to one of the following circuits ((1) or (2)).

(1) Limited-voltage/current circuit conforming to UL508
A circuit that uses, as the power supply, the secondary wiring of an insulating transformer
Maximum voltage (no-load state): 30 Vrms (42.4 V peak) max.
Maximum current:

1) 8 A max. (including short-circuited state) or

2) The current is limited with a circuit-protection device (e.g., fuse) of the ratings shown in the following table:

(2) A Class 2 power supply unit conforming to UL1310 or circuit with maximum voltage of 30 Vrms (42.4 V peak) that uses, as the power supply, a Class 2 transformer to conforming UL1585

Note: Listing approvals

CSA Certification

FCC (US Federal Communications Commission)

IC Certification

Korea Radio Wave Law

Chinese Wireless Telecommunication Standards

Taiwanese Radio Wave Law

top