Menu
Industrial Automation
FL Series
Lighting for Image Processing
Next generation ODR technology
Related Contents
Application Solutions
- Features
- Lineup
- Specifications
- Dimensions
- Catalog / Manual / CAD / Software
last update: April 3, 2023
MDMC Light FL-MD Series
| Model | FL-MD90MC | FL-MD180M |
|---|---|---|
| Applicable controller | FH series | |
| Applicable camera | FH-S series, FZ-S series | |
| Lighting color
(peak wavelength) |
R: Red (Typ.635nm), G: Green (Typ.525nm), B: Blue (Typ.465nm) | |
| Light source | LED | |
| LED safety | W,B: Risk Group 2, R,G: Risk Group 1 | W,G,B: Risk Group 2, R: Risk Group 1 |
| Power supply voltage | 24 VDC±10% (including ripple) | |
| Recommended power
supply |
S8VK-G12024 (manufactured by OMRON, 24 VDC, 5 A, 120 W) | |
| Current consumption | 1.5 A max. | 3.0 A max. |
| Drive method | Constant voltage method | |
| Lighting method | Trigger lighting | |
| Luminance control
method |
Duty light adjustment: PWM frequency of 200 kHz, light adjustment of 128 levels
(configured with vision system controller) |
|
| Trigger lighting | Lighting in synchronization with trigger input timing from the controller (configured with vision
system controller). |
|
| Lighting duration setting | Auto setting in accordance with shutter speed. | |
| Lighting time control | Set with vision system controller or set in accordance with shutter speed. | |
| External interface | Camera connection cable (directly connected with the main unit) Cable length: 500 mm | |
| Ambient temperature | Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation) | |
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | |
| Degree of protection | IP20 (IEC60529) | |
| Vibration resistance | 10 to 150 Hz, (0.35 mm half-amplitude) 80 min each in X, Y, and Z directions | |
| Shock resistance | 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) | |
| Material | Case: Aluminum, PC, PMMA Cable: PVC | |
| Weight | Approx. 0.8 kg | Approx. 3.0 kg |
| Accessories | Instruction Sheet, Compliance Sheet, 24 V power supply terminal block (male) | |
Note:
1. Turn ON the power of this product and vision system controller at the same time or this product first.
2. This light complies with the EN standard (EN61326-1)
(Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2))
Also, the following condition is applied to the immunity test of this product.
There may be cases that light brightness fluctuates within 10%.
3. This light complies with the KC standard.
1. Turn ON the power of this product and vision system controller at the same time or this product first.
2. This light complies with the EN standard (EN61326-1)
(Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2))
Also, the following condition is applied to the immunity test of this product.
There may be cases that light brightness fluctuates within 10%.
3. This light complies with the KC standard.
Photometric Stereo Light FL-PS Series
| Model | FL-PS90W | FL-PS140W | FL-PS260W |
|---|---|---|---|
| Applicable controller | FL-TCC1PS | ||
| Lighting color | W: White | ||
| Light source | LED | ||
| LED safety | Risk group 2 | ||
| Power consumption | 32W | 47W | 61W |
| Ambient temperature | Operating: 0 to 40°C Storage: -15 to 60°C (with no icing nor no condensation) | ||
| Ambient humidity | Operating and storage: 35% to 85% (no condensation) | ||
| Degree of protection | IP20 (IEC60529) | ||
| Vibration resistance (destructive) | 10 to 150 Hz, (0.35mm half-amplitude) 80 min. each in X, Y, and Z directions | ||
| Shock resistance (destructive) | 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) | ||
| Materials | Case: Aluminum, PMMA | ||
| Weight | Approx. 200g | Approx. 350 | Approx. 800g |
| Accessories | INSTRUCTION SHEET (THIS SHEET), Compliance Sheet | ||
Bar Light FL-BR Series
| Model | Wide Area
Model |
High-
brightness Model |
Wide Area
Model |
High-
brightness Model |
Wide Area
Model |
High-
brightness Model |
|---|---|---|---|---|---|---|
| FL-
BR5020W |
FL-
BR5020W-H |
FL-
BR9120W |
FL-
BR9120W-H |
FL-
BR13120W |
FL-
BR13120W-H |
|
| Light source | White LEDs | |||||
| Vibration resistance | 10 to 150 Hz (Double amplitude: 0.7 mm), 80 min each in X, Y, and Z directions | |||||
| Shock resistance | 150 m/s2 3 times each in 6 directions | |||||
| Ambient temperature | Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation) | |||||
| Ambient humidity | Operating/storage: 35% to 85% (with no condensation) | |||||
| Ambient atmosphere | No corrosive gases. | |||||
| Degree of protection | IEC60259 IP20 | |||||
| Weight | Approx. 40 g | Approx. 70 g | Approx. 100 g | |||
| Materials | Case: Aluminum; Cover, side parts, and lens: PC; Cable: Heat resistant polyvinyl chloride;
Connector: Thermoplastic resin with glass |
|||||
| LED safety | Risk Group 2 (IEC 62471) | |||||
| Accessories | Instruction sheet | |||||
The color of white LEDs can vary due to intrinsic characteristics.
Confirm suitability for the application in advance.
Direct Ring Light FL-DR Series
| Model | Wide Area
Model |
High-
brightness Model |
Wide Area
Model |
High-
brightness Model |
Wide Area
Model |
High-
brightness Model |
|---|---|---|---|---|---|---|
| FL-DR32W | FL-DR32W-H | FL-DR50W | FL-DR50W-H | FL-DR90W | FL-DR90W-H | |
| Light source | White LEDs | |||||
| Vibration resistance | 10 to 150 Hz (Double amplitude: 0.7 mm), 80 min each in X, Y, and Z directions | |||||
| Shock resistance | 150 m/s2 3 times each in 6 directions | |||||
| Ambient temperature | Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation) | |||||
| Ambient humidity | Operating/storage: 35% to 85% (with no condensation) | |||||
| Ambient atmosphere | No corrosive gases. | |||||
| Degree of protection | IEC60259 IP20 | |||||
| Weight | Approx. 25 g | Approx. 30 g | Approx. 70 g | Approx. 80 g | ||
| Materials | Case and Lens: PC, Cable: Heat resistant polyvinyl chloride,
Connector: Thermoplastic resin with glass |
|||||
| LED safety | Risk Group 2 (IEC 62471) | |||||
| Accessories | Instruction sheet | |||||
The color of white LEDs can vary due to intrinsic characteristics.
Confirm suitability for the application in advance.
Camera-mount Lighting Controller for FL Series FL-TCC Series
Lighting Controller
| Product type | Lighting Controller | |
|---|---|---|
| Model | FL-TCC1 | |
| Input voltage | Supplied from applicable camera. | |
| Applicable camera | FH-S/SC/S02/SC02/S04/SC04, FZ-S/SC/S2M/SC2M/S5M2/SC5M2/SH/SHC/SF/SFC/
SP/SPC, FQ-MS series and others. |
|
| Applicable controller | FH series | |
| Power consumption | 10 W, 0.9 A max. (including the lighting section) | |
| Number of output channels | 1 | |
| Applicable light | FL-[] series | |
| Luminance
control method |
Functions | PWM frequency: 100 kHz, Light adjustment: 255 levels (set with the Controller) |
| Trigger lighting | Lighting ON synchronized with trigger input timing from the Controller.
(Auto setting in accordance with the shutter speed.) |
|
| Trigger lighting
delay time |
Ton: 30 μs max. (Trigger ready μs)
Toff: 10 μs max. |
|
| External interface | Dedicated communication connector | |
| Ambient temperature | Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) | |
| Ambient humidity | Operating/storage: 35% to 85% (with no condensation) | |
| Vibration resistance | 10 to 55 Hz, (0.7 mm double amplitude) 80 min each in X, Y, and Z directions | |
| Shock resistance | 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) | |
| Materials | Case: SECC, Cable: PVC | |
| Degree of protection | IP20 (IEC60529) | |
| Weight | Approx. 110 g | |
| Accessories | Instruction sheet, Insulation sheet, Mounting screw (M2 ✕ 6 mm) ✕ 4 | |
| Applicable standards | EN61326-1 *, KC | |
* Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
Digital Lighting Controller for FL series FL-STC Series
| Product type | One-channel models | Two-channel models | |||
|---|---|---|---|---|---|
| I/O type | NPN | PNP | NPN | PNP | |
| Model | FL-STC10 | FL-STC15 | FL-STC20 | FL-STC25 | |
| Power supply voltage | 24 VDC±10% (including ripple) | ||||
| Power consumption | 36 W, 1.5 A max. (including the lighting
section) |
72 W, 3 A max. (including the lighting
section) |
|||
| Number of output channels | 1 | 2 | |||
| Applicable light | FL-[] Series | ||||
| Luminance
control method |
CONTINUOUS
mode |
While the Strobe Controller power source is ON, light is continuously emitted.
PWM frequency: 100 kHz, Light adjustment: 400 levels |
|||
| EXTERNAL
TRIGGER mode |
Lighting in synchronization with an external trigger input.
Lighting duration: Continuous while the trigger is input, or 0.1 to 99.9 ms (set in 0.1-ms increments) PWM frequency: 100 kHz, Light adjustment: 400 levels |
||||
| STOROBE
mode |
Lighting in synchronization with the external trigger input, but twice brighter than
EXTERNAL TRIGGER mode. Lighting pulse width: 0.01 to 5 ms (light adjustment: 500 levels equivalent) |
||||
| Luminance
adjustment |
Key | Luminance control method and adjustment value: Slide switch and cross key setting | |||
| I/O | Luminance adjustment value: 9-bit binary input control | ||||
| External interface | Parallel I/O connector (D-sub 15-pin), Terminal block (external trigger input with 2
terminals, power source voltage input with 2 terminals) |
||||
| Ambient temperature | Operating: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation) | ||||
| Ambient humidity | Operating/storage: 35% to 85% (with no condensation) | ||||
| Vibration resistance | 10 to 150 Hz (0.7 mm double amplitude), 80 min each in X, Y, and Z directions | ||||
| Shock resistance | 150 m/s2 3 times each in 6 direction (up/down, left/right, forward/backward) | ||||
| Materials | Case: PC | ||||
| Degree of protection | IEC60529 IP20 | ||||
| Weight | Approx. 100 g | ||||
| Accessories | Instruction sheet,Terminal block connector | ||||
| Applicable standards | EN61326-1 *, KC | ||||
* Electromagnetic environment: Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
Lighting Controller for Photometric Stereo Lights FL-TCC1PS Series
| Model | FL-TCC1PS |
|---|---|
| Applicable vision
system controller |
FH series (Ver.6.00 or higher) |
| Applicable camera | FH-S series, FZ-S series |
| Applicable light | FL-PS series |
| Number of channels | 1 |
| Power supply voltage * | 24 VDC±10% (including ripple) |
| Recommended
power supply |
S8VK-G12024 (manufactured by OMRON, 24 VDC, 5 A 120 W) |
| Current consumption | 3.0 A max. |
| Drive method | Constant voltage method |
| Luminance control method | Duty light adjustment: light adjustment of 255 levels (configured with vision system
controller) |
| Trigger lighting | Lighting in synchronization with trigger input timing from the controller (configured with
vision system controller). |
| Lighting duration setting | Auto setting in accordance with shutter speed. |
| Lighting time control | Set with vision system controller or set in accordance with shutter speed. |
| External interface | Camera connection cable (directly connected with the main unit) 400 mm
Lighting connection cable (directly connected with the main unit) 400 mm |
| Ambient temperature | Operating: 0 to 40°C Storage: -15 to +60°C (with no icing nor no condensation) |
| Ambient humidity | Operating and storage: 35% to 85% (with no condensation) |
| Degree of protection | IP20 (IEC60529) |
| Vibration resistance | 10 to 150 Hz, (0.35mm half-amplitude) 80 min. each in X, Y, and Z directions |
| Shock resistance | 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward) |
| Material | Case: Alminum, Cable: PVC, Camera Mount Plate: POM |
| Weight | Approx. 200 g |
| Accessories | Instruction Sheet (this Sheet), 24 V power supply terminal block (male), camera mount
plate, Compliance Sheet, mounting screws (M2 set screw x 4, M2 flat head screw x 4, M4 flat head screw x 4) |
Note:
1. When supplying the power to this lighting controller, make sure to turn ON the power to this lighting controller first or at
the same time with the vision system controller.
2. When FL-PS260W is used in the length of the power supply line at least 15m, adjust the power voltage to become
24-26.4 V.
3. This lighting complied with the EN standard (EN61326-1)
(Electromagnetic environment : Industrial electromagnetic environment (EN/IEC 61326-1 Table 2))
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
4. This light complies with the KC standard.
1. When supplying the power to this lighting controller, make sure to turn ON the power to this lighting controller first or at
the same time with the vision system controller.
2. When FL-PS260W is used in the length of the power supply line at least 15m, adjust the power voltage to become
24-26.4 V.
3. This lighting complied with the EN standard (EN61326-1)
(Electromagnetic environment : Industrial electromagnetic environment (EN/IEC 61326-1 Table 2))
Also, the following condition is applied to the immunity test of this product.
There are case that Lighting brightness fluctuate Max 10%.
4. This light complies with the KC standard.
last update: April 3, 2023
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.