Main :: Sensing Solutions :: Pressure Sensors

Model Item Appearance		E8F2	E8MS	E8M	E8Y
Model Item Appearance
Differential pressure	0 to 1 kPa	-	-	O	-
	0 to 2 kPa	-	-	-	O
	0 to 5 kPa	-	-	-	O
Positive pressure	0 to 98 kPa	O (100kPa)	O (100kPa)	-	-
	0 to 490 kPa	-	-	-	-
	0 to 980 kPa	-	-	-	-
	0 to 1 MPa	O	O	O	-
Negative pressure	0 to -98 kPa	-	-	-	-
Negative pressure	0 to -101 kPa	O	O	O	-
Applicable fluid		Non-corrosive gas and non-flammable gas			Non-corrasive gas and non-flammable gas
Pressure joint		R(PT) 1/8 or M5			4.5-dai. resin pipe or R(PT) 1/8
Power supply voltage		12 to 24 VDC±10%	12 VDC±10% or 24 VDC±10% (when K3C is used)	12 to 24 VDC±10%
Output	Linear	1 to 5 VDC			4 to 20 mA
Output	ON/OFF	NPN open collector PNP open collector	NPN open collector (when K3C is used)	NPN open collector
Display method		LED (digital and analog)	LED (when K3C is used)		LED
Features		• Ultra-light, ultra-small • Displays both digital and analog values • Independent outputs • Bears CE markings	• Ultra-light, ultra-small • Separate display panel • High-performance Multi-channel controller	• Separate display panel • Small, light sensor • High-performance multi-channel controller	• Small, light • Bright, easy-to-see LED display • Bears CE markings

Differential Pressure Flow Sensors

Model Item Appearance		Simplified Differential Pressure Sensing
		E8Y-A5C-F03V/H	E8Y-A5C-F20V/H

Features		• Realtime flow monitoring • Excellent environmental resistance, simplified differential pressure sensing • Sensing flow range: 0.3 to 3 l/min or 2 to 20 l/min
Rated flow rate range		0.3 to 3 l/min	2 to 20 l/min
Withstand flow rate		5 l/min	40 l/min
Applicable fluid		Non-corrasive gas and non-flammable gas
Power supply voltage		12 to 24 VDC ± 10% max. with a ripple (p-p) of 10% max.
Digital output	Output form	NPN open collector (NO/NC)
	Load current	100 mA
	Output applied voltage	30 VDC max.
	Residual voltage	1.0 V max. with a load current of 100 mA or 0.4 V Max. with a load current of 16 mA
	Repeat accuracy	±3.0% FS
Display	Display	3-digit, 7-segment red LED
	Indicator	Yellow LED indicator (OUT1: lit when digital output is ON), yellow LED indicator (OUT2: lit when digital output is ON)