Page top


Omron uses cookies to improve your experience on this website. By continuing to use the website, you hereby agree to our Privacy and Cookie Policy

Primary Contents

Motion Controllers

Model Standard No. Standard No. Marking Listed/Recognized Category
FQM1 UL508
ANSI/ISA 12.12.01
E198998 cULus Listed NRAG/NRAG7
Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.
Note 2: Products that are certified for ANSI/ISA 12.12.01 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.
Description of Hazardous Locations:
Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
Class II: Locations in which there is combustible dust.
Class III: Locations in which easily ignitable fibers or flyings are present
but are not airborne in sufficient quantities to ignite.
Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
Class I :
Group A: Acetylene
Group B: Combustible gas/vapor, example: hydrogen
Group C: Combustible gas/vapor, example: ethylene
Group D: Combustible gas/vapor, example: propane

Servomotors/Servo Drivers

Model Standard No. File No.
UL508C E179149
R88M-K UL508C E331224
R88A-RG08UA UL508C E179149