Models with Standards Certification

Americas

UL Certifications

Automation Systems

Industrial Components

Sensing Solutions

Safety Solutions

Wireless/RFID Systems

CSA Certification

ABS Certification (US marine standards)

FCC (USA Radio Law)

FDA (US Federal Drug Administration, laser product regulations)

IC Certification

Mexican Radio and Television Law

UL Certification for Automation Systems

Support Software

Note:

1. The above table lists series names. Ask your OMRON representative for details on specific model numbers.

2. Products that are certified for UL 1604 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.

Description of Hazardous Locations:
[Class]
　　　Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
　　　Class II: Locations in which combustible dust is present.
　　　Class III: Locations in which easily ignitable fibers or flyings are present
　　　but are not airborne in sufficient quantities to ignite.
[Division]
　　　Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
　　　Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
　　　Class I:
　　　Group A: Acetylene
　　　Group B: Combustible gas/vapor, example: hydrogen
　　　Group C: Combustible gas/vapor, example: ethylene
　　　Group D: Combustible gas/vapor, example: propane

Programmable Controllers

Note:

1. The above table lists series names. Ask your OMRON representative for details on specific model numbers.

2. Products that are certified for UL 1604 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.

Description of Hazardous Locations:
[Class]
　　　Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
　　　Class II: Locations in which combustible dust is present.
　　　Class III: Locations in which easily ignitable fibers or flyings are present
　　　but are not airborne in sufficient quantities to ignite.
[Division]
　　　Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
　　　Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
　　　Class I:
　　　Group A: Acetylene
　　　Group B: Combustible gas/vapor, example: hydrogen
　　　Group C: Combustible gas/vapor, example: ethylene
　　　Group D: Combustible gas/vapor, example: propane

Field Networks

Note:

1. The above table lists series names. Ask your OMRON representative for details on specific model numbers.

2. Products that are certified for UL 1604 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.

Description of Hazardous Locations:
[Class]
　　　Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
　　　Class II: Locations in which combustible dust is present.
　　　Class III: Locations in which easily ignitable fibers or flyings are present
　　　but are not airborne in sufficient quantities to ignite.
[Division]
　　　Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
　　　Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
　　　Class I:
　　　Group A: Acetylene
　　　Group B: Combustible gas/vapor, example: hydrogen
　　　Group C: Combustible gas/vapor, example: ethylene
　　　Group D: Combustible gas/vapor, example: propane

Programmable Terminals

Note:

1. The above table lists series names. Ask your OMRON representative for details on specific model numbers.

2. Products that are certified for UL 1604 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.

Description of Hazardous Locations:
[Class]
　　　Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
　　　Class II: Locations in which combustible dust is present.
　　　Class III: Locations in which easily ignitable fibers or flyings are present
　　　but are not airborne in sufficient quantities to ignite.
[Division]
　　　Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
　　　Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
　　　Class I:
　　　Group A: Acetylene
　　　Group B: Combustible gas/vapor, example: hydrogen
　　　Group C: Combustible gas/vapor, example: ethylene
　　　Group D: Combustible gas/vapor, example: propane

Motion Controllers

Note:

1. The above table lists series names. Ask your OMRON representative for details on specific model numbers.
2. Products that are certified for UL 1604 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.

Description of Hazardous Locations:
[Class]
Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
Class II: Locations in which there is combustible dust.
Class III: Locations in which easily ignitable fibers or flyings are present
but are not airborne in sufficient quantities to ignite.
[Division]
Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
Class I :
Group A: Acetylene
Group B: Combustible gas/vapor, example: hydrogen
Group C: Combustible gas/vapor, example: ethylene
Group D: Combustible gas/vapor, example: propane

Frequency Inverters

Servo Motors & Drives

Reduced-wiring Devices

Note: The above table lists series names. Ask your OMRON representative for details on certified model numbers.

I/O Relay Terminals

UL Certification on Other Product Categories

Top