Synchronized pulse control multiplies the
frequency of a pulse input by a preset scaling factor and generates a
synchronized pulse output at that frequency. The scaling factor can be
changed from the ladder program, so packaging can continue while
adjusting the feed rate of packaging film or the position of labels.
High-speed processing include the 50-Ás
quick-response inputs, improved scan time (up to 500 program steps in 1
ms), and interrupts. Improved processing can increase productivity; for
example, the timing between detection of a label mark and detection of
the product can be adjusted.
The CPM2A support one-axis
high-speed counters(20kHz single-phase or 5kHz two-phase) and four-axis
high speed counters(2 kHz single-phase only). The length of workpieces
such as cardboard or string can be measured at high speed.
Supports a one-axis pulse output(10kHz)
with trapezoidal acceleration and deceleration and two-axis simple pulse
Control and Monitoring
Mount a Temperature Sensor Unit to
monitor and control temperatures using PID instruction operands and
ON/OFF output signals sent with the PWM instruction. Use in combination
with a PT for simple temperature monitoring and setting.
Analog control is possible using
the optional Analog I/O Unit which can be interfaced to wide range of
I/O devices via analog voltage or current signal.. Input from pressure sensors. Output to inverters.
Interfaces with a wide range of devices.
Compatible with the OMRON Programmable
Terminal's Programming Console functions. Maintenance is simplified with
the on-screen programming operations.
Quick Backup of Program and Data
The handy EMU unit is meant for quick
backup of micro PLC's application program and data. It offers
convenience in the event of application program update of equipment at
remote site without the needs of PC or other programming peripheral.
Simplify Programming with the
The CX-Programmer supports the
development of multiple programs with a wide variety of monitoring and
and Autonomous Control Solution
Faster and More Flexible Operation
with Distributed Control Configuration
The CPM2A allows line additions, faster
operation, and reduced system startup time. The production line can be
made part of a distributed control system by connecting the optional
CompoBus/S I/O Link Unit to the CPM2A. With distributed control, the
production line can be converted to modular systems for reduced startup
time and higher line speeds.