SVC000082P – Vision Basic
COURSE SUMMARY
To equip participants with the basics of Camera, Lighting and their application using Vision FQ2 and its software.
COURSE OUTLINE
- Introduction Vision Sensor FQ2 Series
- Introduction Software and Hardware Touch Finder, Sensor Data Unit, Lens, and Field of View
- Setting Communication
- Introduction Vision Sensor Microscan
- Introduction Software Microscan
- Barcode dan 2D Code Inspection using Vision Sensor Microscan
PRE-REQUISITES
This course is intended for those who do not have basic knowledge of Vision sensor products and are currently learning configuration, installation and settings using software and Vision sensors.
COURSE LOCATION
PT. OMRON Electronics. Menara Bidakara 2, 11th Floor Unit 1-3 Komplek Bidakara, Jl. Gatot Subroto Kav. 71-73 Menteng Dalam, Tebet, Jakarta Selatan 12870 – See Map
COURSE TIMING
9.30AM to 4.30PM
ADDITIONAL INFORMATION
- The above price does not include 11% VAT.
- Fee inclusive of lunch, tea break and course material
- Price includes Registration, Training Materials, Certificates, Snacks (1x / day), Coffee Break (2x / day), + Lunch (1x / day).
- Equipment provided: 1 Computer and 1 Demo Kit will be used for 2 participants.
- Schedules are subject to change at any time and will be confirmed in advance.
- The certificate will be sent after we receive the original proof of PPh23 deduction.
- Training for trainers (Education), commercial on-site training and online training were based on request with terms and condition applied”.
- 6 person minimum. Training classes with less than the minimum number will be brought forward to the next schedule or until the minimum number is filled.
COURSE SUMMARY
Introduction to Sysmac Motion Basic
TOPICS
- Introduction of Generally Servomotor
- Composition Servo: Hardware, Software & Wiring
- System Configuration of Servo
- Programming Tools : Sysmac Studio Software
- Introduction of FB Motion
- Motion Programming (MC_Power, Home, Stop, Stop Zero, Jog)
- Troubleshooting Error and Reset Ethercat and Motion
- Application Exercise Examples
- Motion Programming : (MC_Velocity, Move Relative, Move Absolute)
- Electronic Gearing Concept, MC_GearIn
- Data Tracing
- 3D Simulation
- Application Exercise Examples
PRECONDITION
This course is intended for those who do not have basic knowledge of Vision sensor products and are currently learning configuration, installation and settings using software and Vision sensors.
DURATION
2 working days
LOCATION
PT. OMRON Electronics Training Room Menara Bidakara 1 lt.22, Jl. Pancoran Barat No.kav. 71-73, RT.1/RW.1, Menteng Dalam, Kec. Tebet, Kota Jakarta Selatan, Daerah Khusus Ibukota Jakarta 12870 – See Map
TIME
09.30 – 16.30 WIB
PRICE
IDR 3,000,000 (Exlude VAT%)
PARTICIPANTS
Operators, Technicians, Supervisors involved in the design, Troubleshooting & Operation of PLCs in Industrial Automation.
CAPACITY
6 person minimum. Training classes with less than the minimum number will be brought forward to the next schedule or until the minimum number is filled.
ADDITIONAL INFORMATION
- The above price not include 11% VAT.
- Price includes: Registration, Training Materials, Certificates, Snacks (1x / day), Coffee Break (2x / day), + Lunch (1x / day) .
- Equipment provided: 1 Computer and 1 Demo Kit will be use for 2 participants.
- Schedules are subject to change at any time and will be confirmed in advance.
- The certificate will be sent after we receive the original proof of PPh23 deduction.
- Training for trainers (Education), commercial on site training and online training were base on request with terms and condition applied”.
HOW TO REGISTER / CANCELLATON / REFUND / REGISTRATION POLICY & FAQ
Check on “Training Policy” at the right side of the screen or click here.
RANGKUMAN
Pengenalan Dasar Vision
TOPIK
- Pengenalan Vision Sensor FQ2 Series
- Nama Part dan Fungsi dari FQ2-S4 Series
- Pengenalan Software dan Hardware Touch Finder, Sensor Data Unit, Lensa, dan Field of View
- Konfigurasi dan Instalasi Vision Sensor FQ2-S4
- Jenis Lighting dan pengaplikasiannya
- Setting Communication
- Image Adjustment
- Part 1: Inspeksi Shape Search, Shape Search III, Position Compensation
- Part 2: Inspeksi OCR, Barcode dan 2D Code
- Part 3: Inspeksi Edge Width, Labeling, Color Data
- Pengenalan Vision Sensor Microscan
- Konfigurasi dan Instalasi Vision Sensor Microscan
- Pengenalan Software Microscan
- Inspeksi Barcode dan 2D Code menggunakan Vision Sensor Microscan
PRASYARAT
Peserta diharapkan telah mengenal prinsip dasar elektronika, mengenal konsep rangkaian digital (Logika), dan sudah memiliki keterampilan dasar Komputer.
DURASI
2 hari
LOKASI
PT. OMRON Electronics Training Room Menara Bidakara 1 lt.22, Jl. Pancoran Barat No.kav. 71-73, RT.1/RW.1, Menteng Dalam, Kec. Tebet, Kota Jakarta Selatan, Daerah Khusus Ibukota Jakarta 12870 – Lihat Peta
WAKTU
09.30 – 16.30 WIB
HARGA
IDR 3,000,000 (Harga Tidak Termasuk Pajak)
PESERTA
Operator, Teknisi, Supervisor yang terlibat dalam design, troubleshooting & pengoperasian PLC pada Otomatisasi Industri
KAPASITAS
Minimum 6 orang. Dibawah Kapasitas Minimum Kelas, training akan ditunda mengikuti jadwal selanjutnya atau sampai Kapasitas Minimum Kelas terpenuhi.
INFORMASI TAMBAHAN
- Harga diatas belum termasuk PPN 11%
- Harga tersebut sudah termasuk : Pendaftaran, Materi Training, Sertifikat, Snack (1x/hari), Coffee Break (2x/hari), +Makan Siang (1x/hari).
- Peralatan yang di sediakan : 1 Komputer dan 1 Demo Kit digunakan untuk 2 peserta.
- Jadwal sewaktu-waktu dapat berubah, dan akan di konfirmasi sebelumnya.
- Sertifikat dapat dikirimkan setelah kami terima bukti potong PPh23 yang asli.
- Pelatihan untuk pelatih (edukasi), pelatihan komersial on site dan pelatihan online berdasarkan syarat dan ketentuan berlaku.
CARA MENDAFTAR / PEMBATALAN / PENGEMBALIAN UANG / ATURAN PENDAFTARAN / FAQ
Klik gambar “Training Policy” disebelah kanan layar atau klik disini.
