Menu
Industrial Automation
CJ1W-EIP21
CJ-series EtherNet/IP Unit
Introducing the New EtherNet/IP Unit. More Than 180,000 Words of Tag Data Link Capacity!
Related Contents
Application Solutions
last update: August 16, 2021
International Standards
• The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA,
UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC
Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.
• Ask your OMRON representative for the most recent applicable standards for each model.
UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC
Directives.
• Contact your OMRON representative for further details and applicable conditions for these standards.
• Ask your OMRON representative for the most recent applicable standards for each model.
EtherNet/IP Unit
| Unit
type |
Product
name |
Specifications | Current
consump- tion (A) |
Model | Stand-
ards |
||||
|---|---|---|---|---|---|---|---|---|---|
| Communi-
cations cable |
Communi-
cations functions |
Units
per CPU Unit |
No. of
unit numbers allocated |
5 V
sys- tem |
24 V
sys- tem |
||||
| CJ1
CPU Bus Unit |
EtherNet/IP
Unit  |
Shielded twisted-
pair (STP) cable Categories: 100 Ω at 5, 5e |
Tag Data Link
Functions, Message Communications Functions |
8 max.
*1 |
1 | 0.41 | --- | CJ1W-EIP21
*2 |
UC1,
N, L, CE |
*1. Up to four EtherNet/IP Units can be connected to a NJ CPU Unit. Up to seven EtherNet/IP Units can be connected to
a CJ2H-CPU6[]-EIP. Up to two EtherNet/IP Units can be connected to a CJ2M CPU Unit.
*2. EtherNet/IP Unit with unit version 2.1 or later is required to connect C1JW-EIP21 to NJ-series CPU Unit. Use CPU Unit
with version 1.01 or later and Sysmac Studio with version 1.02 or later.
a CJ2H-CPU6[]-EIP. Up to two EtherNet/IP Units can be connected to a CJ2M CPU Unit.
*2. EtherNet/IP Unit with unit version 2.1 or later is required to connect C1JW-EIP21 to NJ-series CPU Unit. Use CPU Unit
with version 1.01 or later and Sysmac Studio with version 1.02 or later.
Industrial Switching Hubs
| Product
name |
Appearance | Functions | No. of
ports |
Accessories | Current
consumption (A) |
Model |
|---|---|---|---|---|---|---|
| Industrial
Switching Hubs |
 |
Quality of Service (QoS):
EtherNet/IP control data priority 10/100BASE-TX, Auto-Negotiation |
5 | Power supply
connector |
0.07 | W4S1-05D |
Recommended Network Devices
The following table shows the devices recommended for use with the EtherNet/IP.
| Part | Manufacturer | Model number | Inquires |
|---|---|---|---|
| Switching Hub | Phoenix Contact | FL SWITCH SFN 8TX (8 ports) | Phoenix Contact USA Customer Service |
| Contec USA, Inc. | SH8008(FIT)H (8 ports) | CONTEC USA Inc. | |
| Cisco Systems, Inc. | WS-C2955T-12 (12 ports) | Cisco Systems, Inc. Main Corporate HQ | |
| Twisted-pair
cable |
100BASE-TX | ||
| EtherNet/IP compliant cable | - | ||
| Connectors
(Modular plug) |
STP Plug | ||
| Panduit Corporation | MPS588 | Panduit Corporation US Headquarters | |
| Boots | Tsuko Company | MK boot (IV) LB | Tsuko Company Japan Headquarters |
Note: 1. Always use a switching hub when using tag data links in the network.
2. If a repeater hub is used for EtherNet/IP tag data links (cyclic communications), the network's communications load
will increase, data collisions will occur frequently, and stable communications will be impossible.
last update: August 16, 2021
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.