Page top

Industrial Automation

Industrial Automation

K6CM

Motor Condition Monitoring Device

K6CM

Quantifying the status of a three-phase induction motor.

K6CM-CI

List of Models

Monitoring type Power supply voltage Model
Comprehensive current diagnosis type 100 to 240 VAC K6CM-CI2MA-EIP
24 VAC/VDC K6CM-CI2MD-EIP

CT (Order separately)

Rated primary-side current Applicable Relay Model
5 A K6CM-CI K6CM-CICB005
25 A K6CM-CICB025
100 A K6CM-CICB100
200 A K6CM-CICB200
400 A K6CM-CICB400
600 A K6CM-CICB600

Note: 1. One sensor is combined with one main unit. A cable for connection is provided with the CT.
             Select a CT that sets the current of the applicable motor within the measurement range.
             To calculate the current, refer to Comprehensive Current Diagnosis Type Technical Data (Reference) on Data Sheet.
         2. The sensor applicable for CSA certification is K6CM-CICB[][][]-C.

K6CM-VB

List of Models

Monitoring type Power supply voltage Model
Vibration & temperature type 100 to 240 VAC K6CM-VBMA-EIP
24 VAC/VDC K6CM-VBMD-EIP

Input part

Vibration & temperature sensor (Order separately)

Appearance
(pre-amplifier)
Appearance
(sensor head)
Attachment part Applicable Relay Model
3686_lu_8_1 3686_lu_8_2 M6 screw K6CM-VB K6CM-VBS1

Note: One sensor is combined with one main unit.
         The vibration and temperature sensor consists of a sensor head and a pre-amplifier.
         A magnet is provided for the easy attachment of the vibration and temperature sensor.
         Use to determine the position to be measured. Note that measurement accuracy is not guaranteed in the case of
         magnet mounting.

Attachment for Vibration and temperature sensor (option)

Appearance Appearance Model
Adhesive attachment 3686_lu_17_1 K6CM-VBSAT1
Magnet mounting attachment 3686_lu_17_2 K6CM-VBSAT2

K6CM-IS

List of Models

Monitoring type Power supply voltage Model
Insulation resistance type 100 to 240 VAC K6CM-ISMA-EIP
24 VAC/VDC K6CM-ISMD-EIP

ZCT (IRT) (Order separately)

Rated voltage Through hole dia. (mm) Applicable Relay Model
200 to 480 VAC 52 dia. K6CM-IS K6CM-ISZBI52

Note: ZCT (IRT) is the abbreviation for Zero Current Transfer (Insulation Resistance Transfer).
         A cable for connection is provided with the ZCT (IRT).

EtherNet/IP communications cable recommended parts

Use a Category 5 or higher STP cable (shielded twisted pair cable).

Cable with Connectors

Item Recommended
manufacturer
Cable
length (m)
Model
Wire Gauge and Number
of Pairs:
AWG26, 4-pair Cable
Cable Sheath material:
LSZH *2
Cable with Connectors on
Both Ends (RJ45/RJ45)
Standard RJ45 plug type *1
Cable color: Yellow *3
3686_lu_3_1
OMRON 0.3 XS6W-6LSZH8SS30CM-Y
0.5 XS6W-6LSZH8SS50CM-Y
1 XS6W-6LSZH8SS100CM-Y
2 XS6W-6LSZH8SS200CM-Y
3 XS6W-6LSZH8SS300CM-Y
5 XS6W-6LSZH8SS500CM-Y
Wire Gauge and Number
of Pairs:
AWG22, 2-pair Cable
Cable with Connectors on
Both Ends (RJ45/RJ45)
Rugged RJ45 plug type *1
Cable color: Light blue
3686_lu_3_2
OMRON 0.3 XS5W-T421-AMD-K
0.5 XS5W-T421-BMD-K
1 XS5W-T421-CMD-K
2 XS5W-T421-DMD-K
5 XS5W-T421-GMD-K
10 XS5W-T421-JMD-K

*1. Cables with standard RJ45 plugs are available in the following lengths: 0.2 m, 0.3 m, 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 5 m,
      7.5 m, 10 m, 15 m, 20 m.
      Cables with rugged RJ45 plugs are available in the following lengths: 0.3 m, 0.5 m, 1 m, 2 m, 3 m, 5 m, 10 m, 15 m.
      For details, refer to the Industrial Ethernet Connectors Catalog (Cat. No. G019).
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
*3. Cable colors are available in yellow, green, and blue. The last character of the model changes to "-G" or "-B".

Cable/Connector

Part name Manufacturer Model
Cable Hitachi Metals, Ltd. NETSTAR-C5E SA 0.5 × 4P *
RJ45 connector Panduit Corporation MPS588-C *

* It is recommended to use the cable and connector in combination described above.

Industrial switching hub (recommended parts)

Product
name
Appearance Function No. of
ports
Model
Industrial
Switching Hubs
3686_lu_5_1 Quality of Service (QoS):
EtherNet/IP control data priority
10/100BASE-TX, Auto-Negotiation
5 W4S1-05D