Menu
Industrial Automation
E3NX-CA
Color Fiber Amplifier Unit
Smart Fiber Amplifier Units with White LEDs. High Color Discrimination Capability with the Same Easy Operation as Previous Fiber Amplifier Units. Existing General-purpose Fiber Units Can Be Connected.
Related Contents
Application Solutions
last update: July 6, 2016
Fiber Amplifier Units
| Type | Appearance | Connecting method | Inputs/
outputs |
Model | |
|---|---|---|---|---|---|
| NPN output | PNP output | ||||
| Standard models |  |
Pre-wired (2 m) | 1 output | E3NX-CA11 2M | E3NX-CA41 2M |
 |
Wire-saving Connector | 1 output | E3NX-CA6 | E3NX-CA8 | |
| Advanced models |  |
Pre-wired (2 m) | 2 outputs +
1 input |
E3NX-CA21 2M | E3NX-CA51 2M |
| Model for Sensor
Communications Unit * |
 |
Connector for Sensor
Communications Unit |
-- | E3NX-CA0 | |
* A Sensor Communications Unit is required if you want to use the Fiber Amplifier Unit on a network.
Note: Refer to your OMRON website for details on models with wire-saving connectors.
Fiber Units
| Sensing method | Appearance | Sensing direction | Size | Model |
|---|---|---|---|---|
| Reflective |  |
Right-angle | M6 | E32-C91N 2M |
| Through-beam (Grooved type) |  |
Array | 10 mm | E32-G16 2M |
Note: Refer to Fiber Units on your OMRON website or to the Fiber Sensor Best Selection Catalog (Cat. No. E418-E1) for
details on Fiber Units.
details on Fiber Units.
Accessories (Sold Separately)
Wire-saving Connectors (Required for models for Wire-saving Connectors.)
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately.
*Protective stickers are provided.
| Type | Appearance | Cable length | No. of conductors | Model | Applicable Fiber
Amplifier Units |
|---|---|---|---|---|---|
| Master Connector |  |
2 m | 3 | E3X-CN11 | E3NX-CA6
E3NX-CA8 |
| Slave Connector |  |
1 | E3X-CN12 |
Note: Models are also available with a 5-m cable. The model names have the suffix 5M. Ask your OMRON representative
for delivery times.
for delivery times.
Mounting Bracket
A Mounting Bracket is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
| Appearance | Model | Quantity |
|---|---|---|
 |
E39-L143 | 1 |
DIN Tracks
A DIN Track is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
| Appearance | Type | Model | Quantity |
|---|---|---|---|
 |
Shallow type, total length: 1 m | PFP-100N | 1 |
| Shallow type, total length: 0.5 m | PFP-50N | ||
| Deep type, total length: 1 m | PFP-100N2 |
Note: Refer to PFP-[] on your OMRON website for details.
End Plate
Two End Plates are provided with the Sensor Communications Unit.
End Plates are not provided with the Fiber Amplifier Unit. They must be ordered separately as required.
| Appearance | Model | Quantity |
|---|---|---|
 |
PFP-M | 1 |
Note: Refer to PFP-M on your OMRON website for details.
Related Products
Sensor Communications Units
| Type | Appearance | Model |
|---|---|---|
| Sensor Communications Unit for EtherCAT |  |
E3NW-ECT |
| Distributed Sensor Unit |  |
E3NW-DS |
Note: Refer to your OMRON website for details.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
last update: July 6, 2016
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.